귀차니즘

On the main screen type:

*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display (operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
*#62209526# – Display the MAC address of the WLAN adapter. This is available

only in the newer devices that support WLAN
#pw+1234567890+1# Shows if sim have restrictions.

*#92702689# – takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair – if found (0000)
5. Shows life timer of phone (time passes since last start)

*#3370# – Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* – (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# – Half Rate Codec activation.
*#4720* – Half Rate Codec deactivation. The phone will automatically restart

If you forgot wallet code for Nokia S60 phone, use this code reset:*#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345

Press *#3925538# to delete the contents and code of wallet.

Unlock service provider: Insert sim, turn phone on and press vol up-arrow keys) for 3 seconds, should say pin code. Press C, then press * message should flash, press * again and 04*pin*pin*pin#

*#7328748263373738# resets security code.
Default security code is 12345

*#1471# Last call (Only Vodafone)

*#21# Allows you to check the number that “All Calls” are diverted to

*#30# Lets you see the private number

*#43# Allows you to check the “Call Waiting” status of your phone.

*#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to

*#67# Allows you to check the number that “On Busy Calls” are diverted to

*#67705646# Removes operator logo on 3310 & 3330

*#73# Reset phone timers and game scores

*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible

*#7780# Restore factory settings

*#8110# Software version for the nokia 8110

*#92702689#

Displays – 1.Serial Number, 2.Date Made,
3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data

12345 This is the default security code

'Devices > Lumia 640 LTE' 카테고리의 다른 글

루미아 640 공장 초기화  (2) 2016.03.04
루미아 640 SKT 3G 셋팅 ( lumia 640 SKT 3G Setting )  (0) 2016.03.04

1. 전원 버튼을 눌러 종료한다.

2. 전원 버튼을 한번 누른다. (진동! 이 한번)
3. 볼륨 다운 버튼을 누르고 있는다. ( 느낌표!  화면이 나올때까지 )
4. 다음 순서로 누른다 '볼륨 업 => 볼륨 다운 => 전원 => 볼륨 다운'

톱니바퀴가 돌아가며 초기화된다. 기다린다.


'Devices > Lumia 640 LTE' 카테고리의 다른 글

루미아 코드들  (0) 2016.03.04
루미아 640 SKT 3G 셋팅 ( lumia 640 SKT 3G Setting )  (0) 2016.03.04

1. AT&T 에서 언락코드를 받는다.

2. SKT 유심을 넣고 전원을 켜서 언락코드를 넣는다.
3. APN 과 MMS 세팅을 한다.
4. 다이얼에서 '##3282#' 를 누른다.
5. LTE 를 선택한다.
6. 오른쪽아래 ... 을 터치한다.
7. Manual 로 바꾼다.
8. WCDMA 2100 만 선택하고 나머지는 해제한다.


'Devices > Lumia 640 LTE' 카테고리의 다른 글

루미아 코드들  (0) 2016.03.04
루미아 640 공장 초기화  (2) 2016.03.04